Medical Air Cooling Machine

Principle

By extracting the air from the surrounding environment and cooling it to produce a controllable flow of low-temperature air, the cold air therapy device can reach a minimum cooling temperature of -40°C, and then the cold air is applied to the treatment area through the handle. During the treatment process, there is no need for direct contact with the skin. It is suitable for open wounds and cold-sensitive patients. It can ensure that the skin temperature drops by 10°C within 10 seconds to provide a strong analgesic effect.

 

 

 

Advantages

1. Safer: non-contact, the treatment temperature can be monitored for effective cooling throughout the process, and there is no risk of frostbite
2. More intelligent: one-click activation, adjustable wind speed, and cold air can be adjusted accurately and step by step.
3. More durable: stable wind speed and volume, usable all day long, no consumables, buckle design, can be used simultaneously with other equipment
4. Faster effect: contact skin temperature 0-14 degrees below zero, short treatment time, quick effect, shortened treatment cycle

 

Efficacy

1. Rapid local cooling: The effective pain relief and analgesic effect is on average 37% higher than traditional cooling methods.
2. Increase skin thermal protection: Improving the project effect can increase the energy source by 15%-30%, and the project effect can be increased by 5%-15%
3. Reduce project risks and prevent side effects: erythema lasts shorter in 63% of patients, purpura formation rate is reduced by 70%, and scab formation rate is reduced by 83%

 

Safety Precautions

Before power on, operation, maintenance and inspection, you must be familiar with the contents of the instruction manual to ensure correct use. You must also be familiar with the condition of your equipment and all relevant safety precautions when using it.

 

! Note

✱ After receiving the device, keep it upright for more than 3 hours before turning it on. ✱ It should be placed stably to reduce vibration. ✱ When transporting, the machine body should be prevented from tilting more than 30°, and it should not be placed horizontally or upside down.

 

Product Description

1. Product introduction
The cold air treatment device uses an air compressor blower device to compress the air and blow out cold air through the refrigeration device. The cold air cools the epidermis and achieves auxiliary treatment to protect the epidermis and relieve pain without damaging the epidermis.

 

 

2. Treatment scope
Cold air therapy devices are widely used in various types of skin treatment, beauty and body care, weight loss, eyebrow washing, tattoo removal and other scenarios.

 

3. Product advantages
Cold air therapy device increases the tolerance of the epidermis to thermal damage through preoperative cooling, thus reducing the
The risk of skin thermal damage; intraoperative cooling protects the epidermis, making it possible for high energy density to act on deep target tissues; postoperative cooling reduces the risk of skin thermal damage while greatly improving treatment experience and comfort.
* Cold air therapy device increases the epidermal tolerance to thermal damage through preoperative cooling, thereby reducing the risk of epidermal thermal damage.
* The cold air therapy device protects the epidermis through powerful intraoperative cooling, making it possible for high energy density to act on deep target tissues.
* The cold air therapy device effectively protects the epidermis so that the dermis and subcutaneous tissue receive more photothermal effects, thereby ensuring better results in skin rejuvenation, weight loss, and scar removal.
* The cold air therapy device reduces the risk of thermal damage to the epidermis through postoperative cooling and recovery, while greatly improving the customer's treatment experience and comfort, which is conducive to improving customer satisfaction.

 

Product Parameters

 

Skin cooling device
Voltage	Power	Noise	Refrigerant	Air volume
220V	1200W	<65db	404A environmental protection grade	0-2m³/min	Continuously variable speed
Temperature	Touch screen	Universal bracket	Weight	Volume
-30℃ below	7-inch screen	Yes	51KG/vertical	330*730*700mm

 

Operation guide

1. Operation panel
The startup screen of the cooling fan therapy device is as follows:
 

Operation panel	（1）Start Up
Cooling fan therapy device startup screen display	Start button to control the start and stop of the equipment.

 

（2）Wind intensity setting	（3）Working Status
Press "+" and "-" to set different wind speed gears, ranging from 1 to 9;	After the defrost button is turned on, the device temperature rises to 30 degrees or the defrost time reaches 10 minutes. Defrost automatically stops. Generally, if the air outlet intensity is turned to the maximum and the air volume from the air outlet is still very small, defrosting is required.

2. Installation

(1) Parts

 

Strut	Hand Tools	Support rod holder

 

(2) After the installation is completed, as shown below

 

 

3. Boot process
Press the start button of the air cooler therapy device to adjust the air intensity. The temperature display gradually decreases. The air compressor starts to start. The screen displays that the temperature continues to decrease. When the temperature reaches 0 degrees, the device begins to work normally. According to the customer's tolerance for cold wind Choose the appropriate gear based on ability and practical needs.

4. Adjust wind speed
Adjust the gears through the wind intensity on the screen. As the wind speed increases, the noise will increase slightly. Generally, gears 4-6 are selected. The higher the gear, the greater the air volume and the lower the coldness that customers feel.

5. Defrost
When the air cooler therapy device works continuously for about 2 hours (the humidity of the air may vary depending on the time), without changing the fan gear, if the temperature displayed is higher than -10 degrees, it can be defrosted. Press the defrost button and the cold air will When the machine therapy device enters the defrost state, it will no longer cool. When the temperature rises to 30 degrees, it will stop defrosting.

6. Release water
When the cooling fan or therapeutic device is turned on or the defrost is completed and the water level in the water storage box reaches a certain position, the display will prompt "The water tank is full. Please drain the water and click the display to return to the running interface." Turn off the device, unscrew the water drain port at the rear of the skin cooler, drain the water from the water storage box, and then tighten the water drain port to prevent water leakage.

 

 

Precautions for use

* Blow the same area for a long time to avoid frostbite.
* The height of the air outlet from the skin should be more than 8 cm to prevent frostbite.
* Water must be released during transportation, and the inclination angle should not be greater than 30 degrees.
* Do not use alcohol to scrub the panel to prevent the writing from falling off.
* Do not power on and off frequently, and the interval between two power ons should not be less than 3 minutes.

 

After-sales service and warranty period

Thank you very much for purchasing the air cooler therapy device. This product is manufactured under a complete quality management system. The warranty period and after-sales service are explained as follows:

1. After-sales service
(1) When the condition of use is not good, please read and check the instruction manual again.
(2) When a malfunction occurs, please contact the seller or our company’s after-sales service stated in the manual.
(3) During the warranty period, any faults caused by our company’s manufacturing problems will be repaired free of charge.
(4) After the warranty period, repairs will be made for a fee.

2. Warranty period
The product's warranty period is 12 months. If a malfunction occurs during normal use during the warranty period, our company will repair it free of charge and replace the damaged parts free of charge. However, if the malfunction is caused by the following reasons, it will be repaired for a fee even during the warranty period.
(1) Due to errors in use, self-modification, improper self-repair, etc.
(2) Use beyond standard specifications.
(3) Causes such as earthquakes, fires, wind disasters, lightning strikes, abnormal voltage, and other natural disasters.